vs-60eps16pbf, VS-60EPS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 1 document number: 94346 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage input rectifier diode, 60 a features ? very low forward voltage drop ? 150 c max. operating junction temperature ? glass passivated pellet chip junction ? designed and qualified according to jedec ? -jesd 47 ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? input rectification ? vishay semiconductors switch es and output rectifiers which are available in identical package outlines description high voltage rectifiers opti mized for very low forward voltage drop with moderate leakage. these devices are intended for use in main rectification (single or three phase bridge). product summary package to-247ac modified (2 pins) i f(av) 60 a v r 1600 v v f at i f 1.15 v i fsm 950 a t j max. 150 c diode variation single die ba s e cathode 2 13 anode cathode 1 2 3 to-247ac mo d i?e d available major ratings and characteristics symbol characteristics values units i f(av) sinusoidal wa v eform 60 a v rrm 1600 v i fsm 950 a v f 60 a, t j = 25 c 1.15 v t j -40 to +150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-60eps16p b f 1600 1700 1 VS-60EPS16-M3 absolute maximum ratings parameter symbol test conditions values units maximum a v erage forward current i f(av) t c = 118 c, 180 conduction half sine wave 60 a maximum peak one cycle ? non-repetiti v e surge current i fsm 10 ms sine pulse, rated v rrm applied 800 10 ms sine pulse, no v oltage reapplied 950 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 3200 a 2 s 10 ms sine pulse, no v oltage reapplied 4525 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no v oltage reapplied 45 250 a 2 ? s
vs-60eps16pbf, VS-60EPS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 2 document number: 94346 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 30 a, t j = 25 c 1.0 v 60 a, t j = 25 c 1.15 forward slope resistance r t t j = 150 c 3.96 m ? threshold voltage v f(to) 0.74 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 1.0 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg -40 to +150 c maximum thermal resistance, ? junction to case r thjc dc operation 0.35 c/w maximum thermal resistance, ? junction to am b ient r thja 40 typical thermal resistance, ? case to heatsink r thcs mounting surface, smooth and greased 0.2 approximate weight 6g 0.21 oz. mounting torque minimum 6.0 (5) kgf cm (l b f in) maximum 12 (10) marking de v ice case style to-247a c modified (jedec) 60eps16
vs-60eps16pbf, VS-60EPS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 3 document number: 94346 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rati ng characteristics fig. 2 - current rati ng characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 140 150 130 120 110 100 maximum allowable case temperature (c) average forward current (a) 10 20 60 70 30 40 50 0 30 60 90 120 1 8 0 v s-60eps.. series r thjc (dc) = 0.35 k/ w cond u ction angle ? 110 120 130 140 150 maximum allowable case temperature (c) average forward current (a) 20 40 60 100 8 0 0 dc 30 60 90 120 1 8 0 v s-60eps.. series r thjc (dc) = 0.35 k/ w ? cond u ction period 0 10 20 30 40 50 60 70 8 0 90 maximum average forward power loss (w) average forward current (a) 20 10 30 40 50 60 70 0 rms limit 1 8 0 120 90 60 30 v s-60eps.. series t j = 150 c cond u ction angle ? 0 90 8 0 70 60 50 40 30 20 10 100 110 maximum average forward power loss (w) average forward current (a) 20 8 0 100 40 60 0 dc 1 8 0 120 90 60 30 rms limit v s-60eps.. series t j = 150 c ? cond u ction period peak half sine wave forward current (a) number of equal amplitude half cycle current pulse (n) 110100 200 300 400 500 600 700 800 900 v s -60ep s .. s erie s at any rated load condition and with rated v rrm applied following s urge. initial t j = 150 c at 60 hz 0.0083 s at 50 hz 0.0100 s peak half sine wave forward current (a) pulse train duration (s) 0.01 0.1 1 10 100 200 300 400 500 600 700 800 900 1000 v s -60ep s .. s erie s maximum non-repetitive s urge current ver s u s pul s e train duration. initial t j = 150 c no voltage reapplied rated v rrm reapplied
vs-60eps16pbf, VS-60EPS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 4 document number: 94346 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics 1000 10 1 instantaneous forward current (a) instantaneous forward voltage (v) 1.0 1.5 2.0 4.0 4.5 2.5 3.0 3.5 100 0.5 t j = 25 c v s-60eps.. series t j = 150 c 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) 10 steady state val u e (dc operation) v s-60eps.. series single p u lse d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.0 8
vs-60eps16pbf, VS-60EPS16-M3 www.vishay.com vishay semiconductors revision: 12-feb-16 5 document number: 94346 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-60eps16pbf 25 500 antist atic plastic tubes VS-60EPS16-M3 25 500 antist atic plastic tubes links to related documents dimensions www.vishay.com/doc?95541 part marking information to-247ac modified pbf www.vishay.com/doc?95255 to-247ac modified -m3 www.vishay.com/doc?95442 2 - current rating (60 = 60 a) 3 - circuit configuration: 4 - package: p = to-247ac modified 5 - type of silicon: s = standard recovery rectifier 6 - voltage rating (16 = 1600 v) 7 - e = single diode device code 6 2 4 3 5 7 60 e p s 16 pbf vs- 1 1 - vishay semiconductors product environmental digit: pbf = lead (pb)-free and rohs-compliant -m3 = halogen-free, rohs-compliant, and terminations lead (pb)-free
outline dimensions www.vishay.com vishay semiconductors revision: 07-apr-15 1 document number: 95253 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 modified dimensions in millimeters and inches notes (1) dimensioning and tolerance per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.30 0.020 0.051 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.50 2.49 0.059 0.098 e1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 2.54 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 6.98 - 0.275 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c a (6) ? p (datum b) ? p1 d1 (4) 4 e1 view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating 0.10 a c m m ? k b d m m
outline dimensions www.vishay.com vishay semiconductors revision: 21-apr-15 1 document number: 95541 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-247 - 50 mils l/f modified dimensions in millimeters and inches notes (1) dimensioning and tolerance per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish unc ontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jedec ? outline to-247 with exception of dimension c and q symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.35 0.020 0.053 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.17 1.37 0.046 0.054 e1 13.46 - 0.53 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 0.254 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.34 0.065 0.092 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.89 0.015 0.035 ? p1 - 7.39 - 0.291 c1 0.38 0.84 0.015 0.033 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 0.178 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c a (6) ? p (datum b) ? p1 d1 (4) 4 e1 view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) plating 0.10 a c m m ? k b d m m
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
